Print Page | Close Window

’04 Mitsu Outlander Keysense

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=88326
Printed Date: May 11, 2025 at 6:02 PM


Topic: ’04 Mitsu Outlander Keysense

Posted By: a568272
Subject: ’04 Mitsu Outlander Keysense
Date Posted: January 03, 2007 at 11:12 PM

Ok, tomorrow at my shop we have an '04 Mitsu Outlander coming in for a remote start/keyless install.  According to Directechs, the vehicle's keysense wire shows ground at rest and open circuit with key in ignition.  We'll be using a 556UW to bypass immobilizer.  I've been trying unsuccessfully to figure out how to replicate this using relays and have not been able to wrap my head around it.  My question is: Is there a way to do this with relays, or additional parts, or will it work in this vehicle without even using the keysense wires?  Any and all help is greatly appreciated.

Thanks,

Jackson




Replies:

Posted By: profuse007
Date Posted: January 03, 2007 at 11:27 PM
It should work w/o keysense wire.

85 mitsu keysense
86 ign from RS
30 ground
87a 556u keysense

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).


Print Page | Close Window