Fork lift Remote kill system
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=88348
Printed Date: May 01, 2024 at 9:03 PM
Topic: Fork lift Remote kill system
Posted By: bareaudio
Subject: Fork lift Remote kill system
Date Posted: January 04, 2007 at 3:30 PM
I'm trying to figure out the simplest way to set this up, a friend of mine has about 30 forklifts, on each one he wants just the opposite of a remote start system, a remote kill system, basically i'm looking for a one channel output system, That I don't have to modify very much, Can you give me any suggestion on product.
-------------
Nothings impossible! Just takes good engineering.
Replies:
Posted By: Big Dog
Date Posted: January 04, 2007 at 3:36 PM
How about SSKR smart relays from DEI? Pop out OEM ignition or starter relay and replace with SSKR then program remote. One remote per lift or possible to have a master remote which disarms all.
-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.
Posted By: floaterr
Date Posted: January 06, 2007 at 8:48 PM
buy the cheapest keyless entry system on the market that has a starter kill outputs. Wire the relay backwards. In other words, when the alarm is armed have it flip the relay and make the connection for the ignition system. You'll probably want to make sure and not connect the IGN wire to the alarm. Most wont arm with the IGN on..
|