Print Page | Close Window

Pit stop mode/Valet take over mode

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=88449
Printed Date: May 15, 2024 at 7:13 AM


Topic: Pit stop mode/Valet take over mode

Posted By: j12v
Subject: Pit stop mode/Valet take over mode
Date Posted: January 06, 2007 at 4:52 AM

Is it possible to make an alarm have that feature without having a remote starter? I tried to think of ways of doing it with relays but I always end up confusing myself.



Replies:

Posted By: KarTuneMan
Date Posted: January 06, 2007 at 11:39 AM
Take over for what....if there is NO remote starter installed? I am confused....posted_image

-------------




Posted By: j12v
Date Posted: January 06, 2007 at 12:48 PM

Example: Viper 791XV. Valet take over mode: Hit the star button twice within 5 seconds WHILE vehicle is on, and then wait 5 seconds and turn ignition key OFF and remove keys. Vehicle stays on.

I want to know if it is possible to do that with an alarm that doesnt have remote start





Posted By: KarTuneMan
Date Posted: January 06, 2007 at 4:57 PM
No it is not.

-------------





Print Page | Close Window