Print Page | Close Window

1996 chrylser lhs, alarm/remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=88514
Printed Date: May 16, 2024 at 12:46 AM


Topic: 1996 chrylser lhs, alarm/remote start

Posted By: shredder130
Subject: 1996 chrylser lhs, alarm/remote start
Date Posted: January 07, 2007 at 6:25 AM

hi

    i have a 1996 chrysler lhs and i would like to install my ScyTek galaxy 5000rs-2w plus 2 way paging alarm/remote start. i don't know how to install it because of the factory alarm on the car. do i have to use the car's door unlock wire as a factory alarm disarm ?

i also don't know what to do about the ignition 3 (air bag) light wire

any help would be greatly appreciated



Replies:

Posted By: shredder130
Date Posted: January 07, 2007 at 6:40 AM
here is a link to scytek's alarm manuals https://www.scytek.net/company_pdf_manuals.html




Posted By: KarTuneMan
Date Posted: January 07, 2007 at 9:02 AM

Your lock wires (with proper resitors installed) will control the factroy security system.

2 ign. NOT 3.

1 dk.blue  2 RED / wht.  

Stay away from the yellow harnesses, or the harnesses wrapped in yellow tubing.



-------------




Posted By: shredder130
Date Posted: January 07, 2007 at 9:49 AM
so i don't have to connect the air bag light one, i was confused because of the guide on here lists it

Constant 12V+     Pink/Black        Ignition Switch Harness
Starter      Yellow/Gold      Ignition Switch Harness
Ignition      Dark Blue      Ignition Switch Harness
Ignition 2      RED / White 12GA      Ignition Switch Harness
Ignition 3      RED / White 18GA      Ignition Switch Harness (Air Bag Light)
Accessory      BLACK/ Orange      Ignition Switch Harness (Heat/AC)
Tach      Red      WHITE/ Black (PCM Passenger's Wheel Well 2 Cylinder Setting)
Neutral Safety Wire      BLACK/ Light Green      Switch on Driver's Side or Transaxle
Brake Switch      White or WHITE/ Tan      Brake Switch
Trunk Release      BLACK/ White (+)      Switch in Glove Compartment
Trunk Pin      BROWN / Black (-)      Driver's Kick Panel
Parking Lights      BLACK / YELLOW      Driver's Kick Panel
Head Lamp      Green      Light Switch
Hood Pin      n/a      
Factory Disarm      Light GREEN/ Orange (-)      High Driver's Kick Panel
Door Trigger      Yellow (-)      Driver's Kick Panel White 20 Pin Connector
Door Lock      ORANGE / White      Behind Fuse Panel at Door Lock Relays
Door Unlock      Pink/Purple      Positive Trigger
Horn Wire      BLACK/ Red (-)      Horn Relay in Fuse Panel
Windows Up      LF=Light Blue/Gold, RF=BROWN / White, LR=Blue/White, RR=Gray/Black
Windows Down      LF=WHITE/ Gold, RF=PURPLE / White, LR=RED / Black, RR=GREEN / WHITE




Posted By: shredder130
Date Posted: January 07, 2007 at 9:52 AM
oh and how would i do the door lock wiring, i just ordered 4 relays, a dual relay pre-wired block and two prewired relay blocks from parts express today




Posted By: shredder130
Date Posted: January 08, 2007 at 5:41 PM
ttt





Print Page | Close Window