astrostart programing the remote

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=88531
Printed Date: July 07, 2025 at 1:52 AM

Topic: astrostart programing the remote

Posted By: mustang306
Subject: astrostart programing the remote
Date Posted: January 07, 2007 at 2:31 PM

old remote starter astrostart rs-102 how do you reprogram a remote.It's the one with the 8 pins on ,off on the box

Replies:

Posted By: KarTuneMan
Date Posted: January 07, 2007 at 4:23 PM

I came along WAY after this particular model....but it looks like based on the OLD install manual, you put #8 up hit the brake, push a button on each remote needing to be learned (including the old ones) flip #8 down, hit the brake....you should be done. If this is incorrect, PM Hymer and ask him.

-------------

Posted By: Hymer
Date Posted: January 07, 2007 at 11:54 PM

Sounds right to me...

-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair

Print Page | Close Window