Blue led light scanner

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=88627
Printed Date: May 16, 2024 at 1:19 AM

Topic: Blue led light scanner

Posted By: start25
Subject: Blue led light scanner
Date Posted: January 09, 2007 at 8:06 AM

Hello I purchased this led scanner https://cgi.ebay.com/dll?ViewItem&ih=019&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=290064206368&rd=1&rd=1

Does any body know how to hook this up, I want to hook it up instead of original light that came with the alarm.

This has black, red, and blue wires.

I want this to flash when the car is armed.

Thanks

Replies:

Posted By: Hymer
Date Posted: January 09, 2007 at 9:20 AM

Hook it to a ground when armed output red to 12v black to ground and blue to ground when armed, OR if ya hook it to the original LED then red and blue to the red on the original and black to black. I don't know if it will have enough power to run it...

-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair

Print Page | Close Window