2006 Ford F-350, remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=88637
Printed Date: May 15, 2024 at 7:57 PM

Topic: 2006 Ford F-350, remote start

Posted By: redlinecustoms
Subject: 2006 Ford F-350, remote start
Date Posted: January 09, 2007 at 8:55 AM

Here's another problem for you guys. 1wam-s in an F350. Works fine, except for one thing. After being remote started, it will shut off if the truck's High Idle kicks in. So everytime its cold and the trucks high idle kicks in, the compustar will shut off after a few minutes. If the truck is warm and it is remote started, it will run for the full 15 minutes and there will be no problems.

Thanks

Jack

Replies:

Posted By: Hymer
Date Posted: January 09, 2007 at 9:17 AM

Where ya getting the tach? and gas I am asuming?

-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair

Posted By: redlinecustoms
Date Posted: January 09, 2007 at 12:57 PM

No, diesel truck, tach is right behind the fuse box, same place directechs tells ya. It works fine if its warm outside, or if the truck is warm, but if its cold and the high idle of the truck kicks in, the remote starter will shut off after a few minutes, ive done diesel trucks before, but ive never had a problem.

Thanks

Jack

Posted By: KarTuneMan
Date Posted: January 09, 2007 at 1:25 PM

Wiremagic says use an injector......No idea what color wire.

Astro says use the wire thats NOT working for ya, but the astro units you can set # of cylinders and reduce the tach setting.

I'm sorry Im not much help.......

-------------

Posted By: Chris Luongo
Date Posted: January 09, 2007 at 8:15 PM

Try reprogramming tach while revving the engine to simulate the high-idle speed, and see how that works.

Print Page | Close Window