Need ideas about making a siren output

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=88784
Printed Date: May 11, 2025 at 6:50 PM

Topic: Need ideas about making a siren output

Posted By: slammedteg91
Subject: Need ideas about making a siren output
Date Posted: January 11, 2007 at 6:31 PM

I have a compustar RS/keyless entry (but its not an alarm) and i want to hook up a siren that i have. I tried using the lock output but the pulse is too long and it starts blaring instead of the small chirp i want. Is there any way to do this (manipulating the parking light wire wouldn't work b/c sometimes they blink up to 5 times and this would make it blare). Also horn honk only sounds when it is in panic mode. Any hope? thanks!

-------------
-91 Acura Integra RS 5-speed hatch

Replies:

Posted By: KarTuneMan
Date Posted: January 12, 2007 at 8:46 AM

yup....get the correct brain.

-------------

Posted By: KPierson
Date Posted: January 12, 2007 at 12:29 PM

I've got a module on my car ('04 Infiniti G35) that emits a soft electronic beep each time I remotely lock and unlock my car. I couldn't stand hearing the OEM horn honk each time....

-------------
Kevin Pierson

Posted By: brhaugen
Date Posted: January 12, 2007 at 1:28 PM

there is a diagram on this sight (under relays) that shows how to make a steady + to a pulsed +

Posted By: brhaugen
Date Posted: January 12, 2007 at 1:28 PM

there is a diagram on this sight (under relays) that shows how to make a steady + to a pulsed +

Print Page | Close Window