Constant Ground with door lock Acura

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=88795
Printed Date: May 14, 2024 at 12:50 PM

Topic: Constant Ground with door lock Acura

Posted By: alpinemike9835
Subject: Constant Ground with door lock Acura
Date Posted: January 11, 2007 at 9:36 PM

I am trying to get a constant ground when i lock my doors on my 01 Acura CL. I want it to be the ground when armed for my window roll up module. Basically ive searched for wires that contain ground when i arm the factory alarm but cant seem to find one that is constant so do i have to wire a relay off the power lock wire and if so how do i wire up the relay to be ground when i press lock and not be ground when i press unlock? Thanks in advance to anyone with any info on this matter.

Replies:

Posted By: mjmauto
Date Posted: January 11, 2007 at 10:12 PM

Most alarms have ground when armed wires. On dei units this is a orange wire.

Posted By: alpinemike9835
Date Posted: January 11, 2007 at 10:19 PM

my car according to directech.com has no ground when armed wire. It has a ground wire that activates the status led on the door but if i wire the orange dei wire to that wire the windows roll up like 2 inches at a time every time the led flashes. Once the windows roll up all the way the flashing led keeps taging the window module even though the windows are already up. I just need a way to get constant ground when i lock the doors

Posted By: tragik
Date Posted: January 12, 2007 at 7:56 PM

why don't you try using a pulse timer. DEI makes one.

If you trigger the pulse timer with your lock wire, it will provide a ground output for a programmable amount of time. more than enought ime for you to roll up the windows.

there is no factory ground when armed wire on your car.

-------------
Northstart.....or start it your damn self.

Posted By: mikvot
Date Posted: January 12, 2007 at 10:25 PM

hold up....your post says you have a window mod. if u already have a window roll up mod, then you shouldn't need anything......the mod just needs a quick neg. input and then it should roll up. A pulse from your lock wire should work fine.

Posted By: alpinemike9835
Date Posted: January 12, 2007 at 11:32 PM

pulse timer part number 528T got it thanks