1999 Dodge Intrepid, remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=88957
Printed Date: May 10, 2024 at 10:24 AM

Topic: 1999 Dodge Intrepid, remote start

Posted By: davidl79
Subject: 1999 Dodge Intrepid, remote start
Date Posted: January 14, 2007 at 10:07 PM

I'm trying to install a remote start in a 1999 Dodge Intrepid. It has the black key. I hooked up a relay for the second ignition but still nothing. All I get is three clicks when I hit the button. The remote start is an Omega.

Thanks,

Dave

Replies:

Posted By: Velocity Motors
Date Posted: January 15, 2007 at 8:39 AM

Test the starter wire that you have and make sure that it's sending a (+) signal to the starter wire from the remote start.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: Hymer
Date Posted: January 15, 2007 at 9:00 AM

what are your main wire connections?

-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair

Posted By: davidl79
Date Posted: January 16, 2007 at 11:38 PM

I'm not getting any out put from the unit. This is the way that I have it wired.

Unit Car

Starter Yellow

Accessory Black / orange

12 volt X 2 Battery

Ignition Dk. Blue / White

This unit has 2 ignition wires. I used the the wire plug from the unit and relay

500mA Neg. ignition Blue wire

12 Volt Output for relay Red Wire

500 mA Negative starter Green Wire

-------------
David

Posted By: Velocity Motors
Date Posted: January 17, 2007 at 8:14 AM

There's the problem, if the unit does not output a 12 volts signal to the starter wire, then you have a defective CPU.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA