alarm remote start without starter kill

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=89095
Printed Date: July 13, 2025 at 11:26 AM

Topic: alarm remote start without starter kill

Posted By: ihkili18
Subject: alarm remote start without starter kill
Date Posted: January 17, 2007 at 8:37 AM

Hey I am going to install a compustar or ultrastart soon in a 06 rsx type s but I wont be wiring a starter kill as they have frozen on me in the past rendering my car useless. Besides it seems redundant being that the car comes with a transponder bypass. Anyways, so how do I go about doing this? Do I just take the + starter output wire from the alarm and connect it to the vehicles starting wire? Hope someone can help thanx

Replies:

Posted By: ihkili18
Date Posted: January 17, 2007 at 9:48 AM

I'm sure one of you guys have done this with no starter kill. Any ideas would help.thanx

Posted By: prdjr165
Date Posted: January 17, 2007 at 10:49 AM

Correct,just connect the starter out wire to the cars starter wire and your good.

Posted By: splaudio
Date Posted: January 17, 2007 at 6:07 PM

yup solder directly to the starter wire, i dont wire up starter kill unless customer asks then i dont warrenty if they blow a fuse or relay dies and car wont start....

Print Page | Close Window