Print Page | Close Window

central locking toyota lucida, previa

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=89141
Printed Date: May 14, 2025 at 10:53 PM


Topic: central locking toyota lucida, previa

Posted By: zerodentz
Subject: central locking toyota lucida, previa
Date Posted: January 18, 2007 at 1:44 AM

hi, I have just fitted a Uniden 2600 xr alarm in my 1996 Toyota Lucida (previa). The alarm is working fine but I'm not sure how to hook it up to the central locking because the central locking only works off the drivers door key and operating the locking rods inside the drivers door doesn't  operate the central locking, it has to be done with the key. In my other vehicles I have used another actuator in the drivers door and used a relay (sea169) designed for that particular alarm to operate the central locking but I don't know how to do that in this case because turning the key operates the lever which activates the central locking but you can't move the lever by hand. Hope I have explained this problem alright and look forward to getting some advise from anyone who has installed an alarm to these vehicles.

thanks mike




Replies:

Posted By: KarTuneMan
Date Posted: January 18, 2007 at 10:38 AM

So ther is NOT a switch on the door to control the door locks? If not, yes, you will need a relay in the drivers door to move the (lock rods) this will control the locking system. 

UNLOCK

 GREEN/ YELLOW In driver's kickpanel   - 
 DOORPIN RED / white In driver's kickpanel   - 
 TRUNK PIN Common with doors      
 TRUNK RELEASE Manual release      
 FACTORY ARM Blue In driver's kickpanel   - 
 FACTORY DISARM Blue/white In driver's kickpanel  


-------------


Print Page | Close Window