2000 nissan maxima alarm/remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=89243
Printed Date: July 06, 2025 at 10:49 AM
Topic: 2000 nissan maxima alarm/remote start
Posted By: craze
Subject: 2000 nissan maxima alarm/remote start
Date Posted: January 20, 2007 at 1:06 AM
I guys, i got a problem with a 556 dei bypass on 2000 nissan maxima with a prestige alarm/starter the car turn over but it not starting i fallow the info ond also the the tranponder ring around the ignition ring all it do is turn over on over and not tarting can some one help me please thanks craze.
Replies:
Posted By: profuse007
Date Posted: January 20, 2007 at 8:11 AM
It's car starts but doesnt turn over, not the other way around.
check the 556u bypass ring to see if its around the key cylinder/tumbler. the ring must be tight around the cylinder.
was this a self-installed or pro?
-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
Posted By: KarTuneMan
Date Posted: January 20, 2007 at 9:26 AM
Both starter wires being used.......would this affect it not starting, but allowing it to crank? I don't know? -------------
Posted By: craze
Date Posted: January 20, 2007 at 10:04 AM
it's a self install and yes the cold start wire is huck up
Posted By: Velocity Motors
Date Posted: January 20, 2007 at 5:54 PM
Check to make sure that it's not your wiring by placing one of the keys into the ignition column and try to remote start the vehicle. If it starts, then you have a bypass problem..... if it fails then you have a wiring issue.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: craze
Date Posted: January 20, 2007 at 8:45 PM
thanks alot man
|