2001 Grand Am SE Ignition Harness

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=89284
Printed Date: July 07, 2025 at 8:29 AM

Topic: 2001 Grand Am SE Ignition Harness

Posted By: ajscomp372
Subject: 2001 Grand Am SE Ignition Harness
Date Posted: January 20, 2007 at 11:25 PM

In the above mentioned vehicle, what is the best way to expose the ignition harness, leaving it easy to work on?

Replies:

Posted By: roadworks
Date Posted: January 20, 2007 at 11:48 PM

You have to remove the trim bezel a nd the stereo in order to get at the ignition harness. It's tight but it is doable. beware though .. if you have the theft lock on on the stereo ..after you unplug it and re install it you must know the code or the stereo will not work..

Posted By: jacqueslacombe
Date Posted: January 20, 2007 at 11:48 PM

removed cluster removed radio unscrewed the ignition switch pull it out at cluster area and then take the plug out

-------------
cocolaboy

Posted By: roadworks
Date Posted: January 20, 2007 at 11:51 PM

Check this link out.. there are pictures at the bottom

https://www.directwholesale.net/diagrams/diagram.asp?ModelID=14966&MakeID=35&link=SHELBY

Posted By: xtremej
Date Posted: January 21, 2007 at 2:25 PM

If you choose to remove the radio you can unplug the harness allowing easy access for tieing into ignition harness.

-------------

Print Page | Close Window