Print Page | Close Window

viper 550 acting up? wont arm/disarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=89325
Printed Date: May 02, 2024 at 9:45 PM


Topic: viper 550 acting up? wont arm/disarm

Posted By: infinkc
Subject: viper 550 acting up? wont arm/disarm
Date Posted: January 21, 2007 at 6:21 PM

My friends 4 runner has viper 550 in it, it was installed a few years ago, no problems at all, recent battery change but was working after also. Yesterday i got a call and the alarm wasnt responding anymore, both remotes didnt work. Fuses fine. Was working fine earlier in the day. Had them disconnect the battery and reconnect it, then the alarm started working again for a while, then died again. Any suggestions? is there a way to reset the brain? All wires are soldered.
TIA

-------------
There are 10 types of people in the world, ones that understand binary and ones that dont.



Replies:

Posted By: KPierson
Date Posted: January 21, 2007 at 6:44 PM

Check for an under the hood fuse.  I've installed a few 550s in my day that came back because the underhood fuse didn't hold up very well.

I've also had a 550esp in my personal car that had a power wire come out of the harness some how. 



-------------
Kevin Pierson


Print Page | Close Window