Passlock 1, 556L, 1998 Pontiac Grand Am
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=89394
Printed Date: May 16, 2024 at 11:46 PM
Topic: Passlock 1, 556L, 1998 Pontiac Grand Am
Posted By: timmi
Subject: Passlock 1, 556L, 1998 Pontiac Grand Am
Date Posted: January 22, 2007 at 8:23 PM
This is my first remote start install, so don't flame me too bad.
Installing a Astrostart & DEI 556L module on my 1998 Pontiac Grand Am (passlock 1). Does the 556L module get installed in series/inline with the R/S, or is it paralleled? Meaning, are there any connections that go from R/S into bypass module and then to vehicle (series), or can I hook up R/S to vehicle first, and then install 556? (parallel)
The directions sound like its all parallel, but I just wanted to make sure first...
Thanks,
Tim
Replies:
Posted By: Twelvoltz
Date Posted: January 22, 2007 at 9:33 PM
Both, but you cannot really classify it as a series or parallel circuit. Think of it purely as what it really is, an interface between the starter and the vehicle. It is a device that is transparent to the vehicle under normal operating conditions, that tells the vehicle what the vehicle needs to hear when asked to start by remote control.
Your R/S will not operate until both the starter AND interface are hooked up. Does not really matter which one is installed first.
|