Print Page | Close Window

791xv starter wire connection

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=89398
Printed Date: May 14, 2024 at 11:17 PM


Topic: 791xv starter wire connection

Posted By: xxkevo
Subject: 791xv starter wire connection
Date Posted: January 22, 2007 at 10:16 PM

i have a quick question on hooking up the 791xv remote start,

for the heavy guage wire the purple and green wire both connects to the starter wire,

the purple is on the starter side

the green is on the key side

so does this mean i just cut the starter wire in half?  and then tap the  purple to the starter side and the green to the key side?

OR

do am i NOT suppose to cut it and just T tap it to side its suppose to be on?

thanks...




Replies:

Posted By: captainzab
Date Posted: January 22, 2007 at 11:05 PM
this topic is a massive repeat, but anyways

your suppose to cut the starter wire in half, and purp to starter and green to key side.

-------------
Note: You Always Dont Get What You Pay For.



Posted By: f150fan
Date Posted: January 23, 2007 at 2:52 PM
I would strongly recommend soldering this connection since if the connection fails the vehicle will not start.



Posted By: dre187
Date Posted: January 23, 2007 at 9:30 PM
If you do not want to connect starter-kill, you  can just tap the purple wire onto the vehicle's starter wire and leave the green wire unused. If you do want starter-kill, the above stated is right...



Posted By: xxkevo
Date Posted: January 23, 2007 at 10:56 PM
would there be any benefit for me to hook up the starter kill, if my car is a 2001 honda accord with the chiped key? thanks



Posted By: duct tape
Date Posted: January 23, 2007 at 11:32 PM

the benefit is the antigrind feature, this way when the car is remote started, you cant grind the starter by turning the key too far.  




Posted By: spookiestylez
Date Posted: January 24, 2007 at 12:43 AM
great built in feature....if your car has a factory immobilizer built in and you DONT want the starter kill or anti grind feature...just connect the purple wire and cap/tape off the green wire

-------------
RTFM




Print Page | Close Window