02 Sequoia Remote start with oem remote
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=89548
Printed Date: May 14, 2025 at 7:45 PM
Topic: 02 Sequoia Remote start with oem remote
Posted By: Json79
Subject: 02 Sequoia Remote start with oem remote
Date Posted: January 25, 2007 at 6:38 PM
I just bought this Vehicle and wanted to add remote start to it using the factory remote. Has anyone done this? It seems that the Factory keyless is built in with the BCM.. any help is good.. I've seen post on this subject before but its been awhile.. pls let me know what you did and modules you used.. thanks Tuan
Replies:
Posted By: mikvot
Date Posted: January 25, 2007 at 6:58 PM
yes, it can be done.......i use the code alarm CA-410 when i need a system that utilizes factory transmitters. There are many other brands that also carry the same kind of add on. You will also need a transponder bypass to make the remote start work. I use the cs-tata by crimestopper. You will an extra key cut for this module......there are also tons of brands out there that make a module for this vehicle...with some, an extra key is not needed. I have wiring for the vehicle when u need it, and if u need more specifics on how the system works, let me know.
-------------
Posted By: Json79
Date Posted: January 25, 2007 at 7:15 PM
Mikvot,
Thanks for the quick reply on the subject. I have the direcwire and Installogy print out for the vehicle.. if you have a different one that would be great. My store here only have those two softwares. My email
tuandang79@aol.com
Tuan
Posted By: mikvot
Date Posted: January 25, 2007 at 7:30 PM
na.....that should be all you need for wiring info.......directwire is the probably the best out there. -------------
Posted By: Json79
Date Posted: January 25, 2007 at 7:34 PM
you don't happen to know the channel output of the factory keyless on the 02 Sequoia info do you.
Posted By: mikvot
Date Posted: January 25, 2007 at 7:46 PM
are you talking about the channels on the factory transmitters and where the wires are? I don't. If you use the system i listed for you, you dont need any of that stuff. With the add on systems, u tap into the motor wires of the door lock system......generally when the system is done, to start the car, u press....lock, unlock,lock on the factory transmitter or lock lock lock.....this combo tells the remote start to crank....... -------------
Posted By: Chris Luongo
Date Posted: January 25, 2007 at 7:48 PM
Toyota factory transmitters don't work when the car is running.
Only add a remote start to the factory remote if you're prepared to unlock the door manually with the key after remote starting.
Posted By: mikvot
Date Posted: January 25, 2007 at 8:07 PM
yeah, Chris is right. Some people are willing to sacrifice for the remote start, some aren't. If they dont want to, then i would sell em a full system, or a single button remote start.
-------------
Posted By: mikvot
Date Posted: January 25, 2007 at 8:13 PM
scrap the single button...that wont work either.....sell em a full system.......
-------------
Posted By: Mike M2
Date Posted: January 25, 2007 at 9:25 PM
mikvot wrote:
scrap the single button...that wont work either.....sell em a full system.......
I have a few dealers that like the single button RS units on Toyotas. It does suck that you need to use a key to get in, but they also are cheap and don't want to get into a keyless/RS unit if they don't have to. I think using a RS on the factory remotes is worse tho, you can't even turn the RS off unless you let it time out or get in it. ------------- Mike M2
Tech Manager
CS Dealer Services
Posted By: mikvot
Date Posted: January 25, 2007 at 10:08 PM
yeah, thats what i sell my dealers...when they throw in a remote start on a car deal....they want the cheapest thing they can get. -------------
Posted By: Json79
Date Posted: January 26, 2007 at 12:01 AM
That's funny how you guys say that. At the shop i always ask myself "why in the heck does the customer want to add remote start on the factory system" and i do it my own vehicle. I just hate to add a siren and having a aftermarket style key fob on my keychain.. Don't get me wrong i have Clifford G5 in all my other cars. but this time i want to keep it nice and clean. But thanks for the help guys!. tuan
Posted By: Chris Luongo
Date Posted: January 26, 2007 at 6:40 AM
Nice and clean, I do get that......there's never a need to install a siren just to have a remote starter.
And you wouldn't need to carry two remotes......you could just put in an aftermarket unit to do start, locks, rear window, and panic.
Another option would be the one-button Audiovox Pursuit PRO-9056/Prestige APS-901. It has a special feature where if you hold down the single button, it'll also unlock the door. (No lock, just unlock.)
If you're going to do a remote start off the factory remote, and you're not concerned about people getting into the car, you could always use the unit's disarm output to ALWAYS unlock the door whenever the remote starter is activated.
|