01 mazda protege

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=89578
Printed Date: April 28, 2024 at 9:16 AM

Topic: 01 mazda protege

Posted By: fosgate2001
Subject: 01 mazda protege
Date Posted: January 26, 2007 at 8:29 AM

im hooking up an alarm on a 2001 maza protege and have a quick question about door locks the alarm has both positive and negative outputs for the door locks the mazda is a single wire system i have 2 4.7k resistors wondering if i need relays also and if so do i need to have 12 volts or a ground on terminals 87 if someone could please tell me how to wire the locks to make them work correctly i would greatly appericate it

Replies:

Posted By: profuse007
Date Posted: January 26, 2007 at 10:47 AM

relays required.

Click here. First diagram

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).

Print Page | Close Window