Can i change my Clifford LED with a hyperbrite one

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8958
Printed Date: May 03, 2025 at 6:48 AM

Topic: Can i change my Clifford LED with a hyperbrite one

Posted By: Dan M C
Subject: Can i change my Clifford LED with a hyperbrite one
Date Posted: February 02, 2003 at 3:06 PM

I have an older Clifford Arrow II alarm in my car,now with the new LED's out there mine doesn't seem bright enough...my question is can i replace the original LED with one of those VARAD L.E.D. type.Will the varad led draw more power than the clifford's led or be about the same,any answers will be apreciate it.

Thank you posted_image

-------------
Dan M C

Replies:

Posted By: Dan M C
Date Posted: February 02, 2003 at 9:10 PM

Somebody is sure to be able to answer to this.... posted_image

-------------
Dan M C

Posted By: PLAYER69
Date Posted: February 02, 2003 at 10:30 PM

Should be fine. LEDs don't draw much power at all. I am not familiar with the VARAD LED but I seriously doubt there would be any problems.

Print Page | Close Window