1996 jeep grand cherokee disarm wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=89624
Printed Date: May 18, 2025 at 6:54 PM

Topic: 1996 jeep grand cherokee disarm wire

Posted By: gottajeep
Subject: 1996 jeep grand cherokee disarm wire
Date Posted: January 27, 2007 at 12:10 AM

I recently purchased a DEI 562t R/S. I'm trying to get a junpstart on the wires to splice into, and I'm having a hard time finding the:

Factory Alarm Disarm (H2/4)

Factory Rearm Output (H2/2)

I also have a question about the neutral safety switch, I have read that since most vehicles won't start unless the transmission is in Park or Neutral, one only needs to install the toggle switch in series with the Neutral Safety Switch Input and ground.

So, if I do this, the Jeep G. Cherokee not start in gear as long as I ground the input. The toggle switch is used strictly to disable the remote start (i.e. working under the hood). Please correct me if I am anywhere near wrong.

Thanks!

Replies:

Posted By: KarTuneMan
Date Posted: January 27, 2007 at 11:50 AM

Pin 14 black connector at the BCM. Purple / YELLOW.

Also found in the door harness drivers kick. It's a NEG(-) pulse

-------------

Posted By: splaudio
Date Posted: January 27, 2007 at 11:50 AM

it arms when locked. purple / YELLOW - wire in door harness DKP for disarm. if u have a gray key ur gonna need a bypass. if u need one email me SPLaudio78@hotmail.com

Posted By: Velocity Motors
Date Posted: January 27, 2007 at 12:17 PM

Sentry systems in Jeeps didn't come out till 1999 as well as the multiplexed door lock systems.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA