92 camry t-tap problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8971
Printed Date: May 12, 2025 at 1:48 PM
Topic: 92 camry t-tap problem
Posted By: tazmoe
Subject: 92 camry t-tap problem
Date Posted: February 02, 2003 at 6:36 PM
My Viper 300+ was installed by a local MobileOne a few years back and just last year my driver side door switch won't lock. The button can unlock but can't lock...the passenger side works fine. Also my rear passenger side window refuses to roll down. If I jump a wire directly to the plug the window rolls down and can roll back up if i reverse wires. Today I took down my steering column panels to get to the alarm...I noticed my factory doorlock wires were t-tap for the unlock/lock. i also noticed one of my window wires were t-tap. I'm not sure what the color is but that t-tap doesn't lead to back to the alarm. My question is if the wire coming from the left side of the t-tap is not connect but the wire coming from the right side of the tap is connected...will the alarm still be able to lock the door? I'm guessing I might have a broken connection from the t-tap.
Replies:
Posted By: Velocity Motors
Date Posted: February 02, 2003 at 6:48 PM
If the connection is broken, then you wil not have any of the doors lock. I suggest replacing all the T-taps with solder connections and see if this helps.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: zargon
Date Posted: February 02, 2003 at 8:17 PM
Get rid of all t taps and scotch locks, they often cut the wire in half, and if they don't do that then they will come unpluged, either way they suck!!!
-------------
zargon ruler of estranorth
|