cm3000 pager problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=89729
Printed Date: July 06, 2025 at 10:50 AM

Topic: cm3000 pager problem

Posted By: veller
Subject: cm3000 pager problem
Date Posted: January 29, 2007 at 3:16 AM

Hi,
I just got CM3000 V.3 with Nu8000R pager installed on 1996 Civic with MT, everything works fine except
2 way pager it does not tell me if car started or doors locked. I can start my car from couple blocks away so t
he range is fine but I don't get any response. It was working fine right after installation but then I accidentally
went in to Valet mode and after turning it off it stopped working.

Any suggestions would be appreciated.

Replies:

Posted By: Velocity Motors
Date Posted: January 29, 2007 at 10:13 AM

Reset the system by toggling the ignition from OFF to ON 5 times within 3 seconds and press button 1 on the 2 way remote and right after that press the LOCK button on the one way remote.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: veller
Date Posted: January 29, 2007 at 7:57 PM

Thanks for responce,

Tried that several times - no luck,

Any other ideas?

Posted By: Velocity Motors
Date Posted: January 29, 2007 at 9:59 PM

Return the remote to the place that sold you the system, should have warranty on it.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window