door actuators, 95 Mazda Mx3

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=89809
Printed Date: July 14, 2025 at 10:57 PM

Topic: door actuators, 95 Mazda Mx3

Posted By: elnoyl
Subject: door actuators, 95 Mazda Mx3
Date Posted: January 30, 2007 at 10:22 PM

I want to add actuators to the drivers and passenger door on my 95 Mazda Mx3. I was wondering which actuators to go with? I found the dei 524T actuators. I am hooking them up to a compustar 900fm as. I was wondering so do i just split the unlock and lock wires off the harness and connect them to each actuator? How difficult of a job am i looking at? I have done alarm installs just never have added actuators. Do i need relays? I noticed some actuators are 5 wire and some are 2. Please walk me through the process so i can be prepared for the job. Thanks in advance

max

Replies:

Posted By: captainzab
Date Posted: January 31, 2007 at 12:06 AM

do a search about doorlock actuators. (MASSIVE REPEAT)
you will find out that all 2 wire actuator are the same, just retagged by different companies.
countinue searching and you will find out how to wire up the relay.
you can also go to basic>relay and read how to wire up reversing polarity.
door actuator search result
(do a seperate search on how to wire up relay for aftermarket actuators if you need more help)

-------------
Note: You Always Dont Get What You Pay For.

Posted By: pitoaudiovisual
Date Posted: January 31, 2007 at 9:08 AM

a company called sonic electronix have the cheapest locks about 15 each and the wiring requires 2 relays and the hardest part of the job is to hide the actuator .. it took me about 2 hrs to do a two door car to make the install perfect so be prepared

-------------
Confidence is the key to any project!!

Posted By: pitoaudiovisual
Date Posted: January 31, 2007 at 9:12 AM

here is the relay set up posted_image

-------------
Confidence is the key to any project!!