Print Page | Close Window

autostart any idea where to connect?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=89909
Printed Date: May 16, 2025 at 4:10 AM


Topic: autostart any idea where to connect?

Posted By: megatfauzi76
Subject: autostart any idea where to connect?
Date Posted: February 01, 2007 at 8:11 PM

Hai..

I just install autostart to my car..My Problem..My alarm dont have any aux channel..So I use my lock button at my remote to start the engine..Press the lock button 3 times in 3 sec than the engine start..To shutdown the engine do the same thing..

Now Im scared if i always press the lock button 3 times in 3 sec to activate the autostart..it can break or damaged my door lock motor and my window roll up(529t)..

Can i use 611T or 528T...to solve this problem? Any idea? To start  the car, Press the lock button continously for 3 sec( I set my autostrat module 1 pulse to start).. To lock the door, press te lock button like normal...Can i do this using 611T or 528T?

Can anyone help me? Guide me about the wiring? Also anyone have diagram for 611t and 528T?

Thank you




Replies:

Posted By: imseth85
Date Posted: February 02, 2007 at 12:30 AM
this won't screw up anything, this is how most shops wire up starters to factory alarms. The actuator definitely cools down in between pulses even at that rate. They're built to take it.

-------------
Seth Alvo     NY
Mobile Electronics Installer


Print Page | Close Window