help on vats bypass for 98 gmc safari

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8992
Printed Date: June 26, 2025 at 6:58 AM

Topic: help on vats bypass for 98 gmc safari

Posted By: ossrom
Subject: help on vats bypass for 98 gmc safari
Date Posted: February 03, 2003 at 10:06 AM

my question is what wires ami supose to mesure with my ohm meter..........

i see three very small gage wires ..... ORANGE / black, light blue and light tan color...

ay help will be appriciated, thanks alot.

-------------
ossrom

Replies:

Posted By: kickyride
Date Posted: February 03, 2003 at 10:48 AM

Hi,
You should measure between the ORANGE / black and the key side of the tan(could it be yellow?) wire (with wire cut). What you'll want to do is measure the resistance immediately after trying to crank the vehicle. It won't start with the wire cut. Also, remember not to touch your probes or the exposed wires with your fingers. This can throw off the resistance. I hope this helps.

-------------
Mike
Sales/Tech Support - KICKYRIDEoCOM mobile electronics
MECP 1st class-Security Specialist

Posted By: PLAYER69
Date Posted: February 03, 2003 at 11:50 AM

Just so you know, the sercurity system on that van is called passlock 2 not vats. Vats is usually called passKEY. This is the ones that have the resistor in the key.

Posted By: ossrom
Date Posted: February 03, 2003 at 7:34 PM

thanks for the help

-------------
ossrom

Print Page | Close Window