Print Page | Close Window

2006 colorado, bypass

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=89930
Printed Date: May 10, 2025 at 10:36 PM


Topic: 2006 colorado, bypass

Posted By: mlaurenza
Subject: 2006 colorado, bypass
Date Posted: February 02, 2007 at 10:14 AM

I have done a couple of these allready but, I never had any luck with the XK-06 Bypass. I have always used the relay method. What way has been the most reliable for everyone here?



Replies:

Posted By: kgerry
Date Posted: February 02, 2007 at 5:16 PM
PLJX is my module of choice for these units.....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979



Posted By: another-kelly
Date Posted: February 02, 2007 at 8:41 PM
relays/resistors only for me



Posted By: saskpuller
Date Posted: February 03, 2007 at 3:40 PM
The xk06 programmed to plxr doesn't work. Bypasskit.com is aware of the problem but as yet haven't changed anything. I use the plxr or pljx dependinf on what I have in stock that day. It sure was a PITA the first one I did trying an XK06.



Posted By: mlaurenza
Date Posted: February 03, 2007 at 6:05 PM

I agree i never had much success with that module but bypass does make some other good ones. Well I did a 2006 Colorado last night in 55 min. with the relays and resistor method so I guess I will stick with that method. Thanks


Print Page | Close Window