Print Page | Close Window

giordon 686a and keyless entry

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=90004
Printed Date: May 06, 2025 at 5:53 AM


Topic: giordon 686a and keyless entry

Posted By: elstev0
Subject: giordon 686a and keyless entry
Date Posted: February 03, 2007 at 4:44 PM

i have a giordon 686a and steelmate 386m central locking, i cant figure out how to connect them.

The steelmate has 5 wires Brown, White, black, Green, Blue with the blue and green wires going to connect to the other door actuators.

Any ideas on this would be greatly received.



Replies:

Posted By: elstev0
Date Posted: February 04, 2007 at 2:29 AM
well i finally figured out how to get the central locking working i actually clicked on a banner for asianwolf and downloaded the instructions for their alarms which were very clear.

orange - ORANGE / black GROUND
white OPEN (blue on actuator)
yellow - yellow/black +12v
WHITE/ black CLOSE (green on actuator)


Print Page | Close Window