1998 integra unlock wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=90008
Printed Date: July 13, 2025 at 1:41 PM

Topic: 1998 integra unlock wire

Posted By: jmacf14
Subject: 1998 integra unlock wire
Date Posted: February 03, 2007 at 7:33 PM

Here's the deal, I found the BLACK/ red wire in the gray connector behind cruise module in the kick panel. But when I test with my dmm, I get know reading. It should read 12v untill I push the unlock button (I tried both doors) and then the voltage goes to zero. But there is nothing, not even 12v at rest. anybody else encounter this problem? Is there another wire somewhere else to tap into? I tried all the others in that connector and no luck on the unlock. The lock I found easily, and it reads as it should. Any help appreciated.

-------------
jmacf14

Replies:

Posted By: KarTuneMan
Date Posted: February 03, 2007 at 7:37 PM

unlock is lt.grn, lock is blk/wht. Unlock could also be grn/red. NEG(-) pulse. Found HIGH in the drivers kick.

I have no idea what you have found and tested?

-------------

Posted By: jmacf14
Date Posted: February 03, 2007 at 7:42 PM

thanks for quick reply. I got the wiring info from my 12volt resource disc and also from this sights "vehicle wiring" section both called for BLACK/ white lock, and BLACK/ red unlock. thats what I had to go by. Thanks again for info, I will try that in the morning.

-------------
jmacf14