Print Page | Close Window

Clifford concept 300 aux outputs

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9006
Printed Date: May 15, 2024 at 12:57 AM


Topic: Clifford concept 300 aux outputs

Posted By: JohnnyD
Subject: Clifford concept 300 aux outputs
Date Posted: February 03, 2003 at 1:20 PM

I wonder if anyone can help me?

My mate has a clifford concept 300 and i am designing a circuit to run some stuff off one of the accessory channels (ie: when he presses a button on the remote, my circuit comes into play) but i need to know:

What is the voltage out of these things? i have been told it's +3v - if so, can you ground it to the car body or not?

I would have thought it was either +12v or just a ground switch.

Cheers.



Replies:

Posted By: 10nesne1
Date Posted: February 04, 2003 at 1:14 AM
Well, the aux output from Concept 300 are 500mA Negative output and it required a relay to hookup to your circuit.



Posted By: cva2000uk
Date Posted: February 04, 2003 at 2:15 AM

and if you want a diagram for it you can get it from clifford's web site.

download the wiz software onto ur laptop and buy the wizard lead.

this makes life allot easierposted_image



-------------
"you wont like me, when i get angry" .



Posted By: JohnnyD
Date Posted: February 04, 2003 at 3:34 AM

the clifford website hasn't got the concept 300 diagrams on there. My mate said he measured the voltage out and it was +3v so why would this be if it is a negative switch?

If it is a negative switch, do i take a +12v supply through the relay coil back into this aux switch and use the relay contacts for the circuit???

Cheers lads.



-------------


Print Page | Close Window