I have a MARS 11 Remote start and needing to know if it will go into a 2006 Chrysler 300 2.7L with the factory keyless on the key, but it doesnt have the factory alarm.... and if so, i need help because the dam wiring instructions suck. Can Anyone help? Also, does anyone recomend an audiovox one or something that will work if this wont? I also have the IB-UCH2 sentry key bypass for the car by OMEGA. works great on my neon... this should work on this car too i hope. PLEASE HELP!!!! I HAVE TO GET INSTALLED BY NEXT FRIDAY!!!!!!
-------------
Rob
I do not have access to the installation manual for Mars11, but I can not see any reason it would not work. If it offers an 'activation' input then you can use the door lock actuator leg to turn the system on and off and just use the factory transmitters to activate and deactivate the RS.
Do yourself a favor and pick up something like
this. It will bypass your transponder (like your IB-UCH2) but will also give you the MUX output required for the second starter/accessory wire in your car.
There are a lot of posts on this site about the 300/Charger platform on this site. Do some reading and you will see that there are other options than what is listed in most tech sheets.
-------------
Installer, IT support, and FFL. I need less hobbies.
The mars 11 has a 2nd ingnition, and 2nd starter wire (- ) 500ma. and has a YELLOW /GREEN wire that can be used as an additional accessory wire... i just need to find a diagram on how to hook this up correctly.... i see that audiovox has a diagram, but it is way different than the diagram in the manual
-------------
Rob