autopage rs 860, 95 nissan sentra

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=90183
Printed Date: May 05, 2025 at 8:28 PM

Topic: autopage rs 860, 95 nissan sentra

Posted By: ceasar326
Subject: autopage rs 860, 95 nissan sentra
Date Posted: February 07, 2007 at 8:20 PM

I have this Autopage rs 860. Ive pt it to a Nissan Sentra 95. Ive done a few remote starts, but this is my first time dealing with autopage. The problem is that i dont get a responce and the light blinks raplely. If somebody have any information of what the problem might be or if am missing something please help!

Replies:

Posted By: dirty96
Date Posted: February 08, 2007 at 8:31 AM

that doesn't make any sense... When is it doing this? and the lights blink raplely? More info and I mat be able to help

Posted By: ceasar326
Date Posted: February 08, 2007 at 5:14 PM

i have hook up an autopage rs-860 on to a nissan sentra 95. the problem that i have is that ive try remote starting the car and it wound responce.ive try unlocking the car locking it with the transmitter and it wound respone.the led that came with the alarm is blinking fast. i dont know why, i whant to know if its a bad brain! please help!

Posted By: Twelvoltz
Date Posted: February 08, 2007 at 6:39 PM

If you read through that post it really is hard to follow. I would strongly suggest spell checking as well.

Are you saying that your Autopage remotes are not working at all? If the LED is flashing very rapidly, do the remotes need to be programmed first? Checking the installation manual's troubleshooting section should shed some light on this for you.

-------------
Installer, IT support, and FFL. I need less hobbies.

Posted By: dre187
Date Posted: February 08, 2007 at 7:11 PM

sounds like you either...

a) didn't connect the hoodpin switch or grounded it

b) didn't ground or connect the neutral safety switch

c) didn't program the tach

d) didn't program the remote

Print Page | Close Window