Print Page | Close Window

’04 pacifica do u need to disarm for r/s

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=90216
Printed Date: May 08, 2025 at 10:06 AM


Topic: ’04 pacifica do u need to disarm for r/s

Posted By: mxxmikexx
Subject: ’04 pacifica do u need to disarm for r/s
Date Posted: February 08, 2007 at 11:29 AM

Will the factory alarm trip if you dont run wires into the door for factory alarm disarm? Ive done several magnums/chargers/pickups with the same sentry key setup and ignition systems as the pacifica, and i never had any issues with the factory alarm tripping when i just add a one button starter and use the factory sentry key for keyless. Im just wondering because on directechs the pacifica is the only car that doesnt say the factory alarm will disarm with ignition and transponder. Just want to make sure i dont run into any problems and quote the job accordingly

-------------
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106



Replies:

Posted By: cutter1122
Date Posted: February 08, 2007 at 1:31 PM
use CHDL6-PK2      www.bypasskit.com



Posted By: Chris Luongo
Date Posted: February 08, 2007 at 5:34 PM
It'll disarm all by itself when remote started. We do a lot of one-buttons on those too.


Print Page | Close Window