programing remote for hornet 570t
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=90312
Printed Date: May 15, 2024 at 7:26 AM
Topic: programing remote for hornet 570t
Posted By: derrickg
Subject: programing remote for hornet 570t
Date Posted: February 10, 2007 at 3:27 PM
i just bought a 570t off ebay and it didnt have a remote in th box this is a new unit is there any way that i can program a new remote if i dont have the original one
Replies:
Posted By: mikvot
Date Posted: February 10, 2007 at 3:43 PM
you dont need the original tx.
1. Fuses. Remove both fuses from the control module fuse
holders then re-insert into main fuse holders.
12 © 2005 Directed Electronics—all rights reserved
2. Key. Turn the ignition to the ON position.
The parking lights will turn On.
3. Program Mode. Press and hold the program button on the
control module. The parking lights will flash Off and then
back On to acknowledge program mode.
4. Programming. Press and hold button on the transmitter.
The parking lights will flash Off and then back On to
acknowledge transmitter programming.
To add additional transmitters (within 10-seconds of the first
transmitter) Press and hold button on the additional transmitter.
-------------
|