aiwa radio, no sleeve, 93 explorer

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=90323
Printed Date: May 04, 2025 at 11:16 AM

Topic: aiwa radio, no sleeve, 93 explorer

Posted By: Bladerunner
Subject: aiwa radio, no sleeve, 93 explorer
Date Posted: February 10, 2007 at 9:58 PM

I have an Aiwa radio that doesn't have the install sleeve. Good radio. I need to install it in a 93 Ford Explorer. How can I go about this? Aren't the Metra kits made for the sleeve?

Replies:

Posted By: tbone587
Date Posted: February 11, 2007 at 12:28 PM

you could iso mount the radio if the kit supports that.. All the metra kits I have used for ford didnt have iso, but maybe they have one. If not, u can use any cage from and old radio and make it work

Posted By: Mike M2
Date Posted: February 11, 2007 at 12:39 PM

I don't believe Metra makes an Iso kit for a 93 Explorer. Like T said, use any old cage and duct tape it to the radio....

-------------
Mike M2
Tech Manager
CS Dealer Services

Posted By: chiqui_draculin
Date Posted: February 14, 2007 at 10:41 AM

I was able to purchase another sleeve on crutchfield part finder. their phone # is 1-888-806-6880 It takes about a week to ship.

Posted By: Bladerunner
Date Posted: February 21, 2007 at 8:51 AM

Thanks for the tips. I didn't see anything in the Metra kit that helped with the iso mounting. I will call Crutchfield for assist.
Thanks much.

Print Page | Close Window