f350 5 wire pics?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=90417
Printed Date: May 12, 2025 at 1:49 PM

Topic: f350 5 wire pics?

Posted By: sesh1975
Subject: f350 5 wire pics?
Date Posted: February 13, 2007 at 9:12 AM

Ok Im struggling here just a bit. Is there anyone that can show me how you hooked up the dual relay 5wi to the actual wires. I have tried hooking this up 3 times now and its the only thing left for me to do. I just cant get it to work right. I cut the pink / YELLOW and the pink/green and hooked those up to the relays and everytime it blows the fuse. Please help.

Thank you

Shawn

Replies:

Posted By: mikvot
Date Posted: February 13, 2007 at 9:22 AM

86 and 87 of both relays need 12v. 85 -lock or unlock from alarm
lock relay....cut the pink / YELLOW....switch side of wire goes to 87a
car side goes to 30.
unlock relay....cut the pink/green.....switch side goes to 87a, car side goes to 30.
Make sure these wires are a thicker guage, and that they pulse positive with the door lock switch.
When you cut the wire, the switch side will give you 12v when locked or unlocked.

-------------

Posted By: the12volt
Date Posted: February 13, 2007 at 9:43 AM

-------------
posted_image

the12volt • Support the12volt.com

Posted By: sesh1975
Date Posted: February 13, 2007 at 11:30 AM

That is the same as I hooked it up. Im going to give this one more shot. Thank you for the replies. Ill see what I can come up with.

Shawn

Posted By: sesh1975
Date Posted: February 13, 2007 at 11:43 AM

mikvot wrote:

86 and 87 of both relays need 12v. 85 -lock or unlock from alarm
lock relay....cut the pink / YELLOW....switch side of wire goes to 87a
car side goes to 30.
unlock relay....cut the pink/green.....switch side goes to 87a, car side goes to 30.
Make sure these wires are a thicker guage, and that they pulse positive with the door lock switch.
When you cut the wire, the switch side will give you 12v when locked or unlocked.

This doesnt match the diagram. Is the diagram wrong?

Posted By: the12volt
Date Posted: February 13, 2007 at 11:45 AM

Both are correct. The only difference between the two is the polarity at the coil of each relay, which doesn't matter.

-------------
posted_image

the12volt • Support the12volt.com

Posted By: sesh1975
Date Posted: February 13, 2007 at 12:01 PM

the12volt wrote:

Both are correct. The only difference between the two is the polarity at the coil of each relay, which doesn't matter.

Ok Thank you very much!

Shawn