1996 Ford Probe

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=906
Printed Date: July 26, 2025 at 10:01 PM

Topic: 1996 Ford Probe

Posted By: Dave O'Sullivan
Subject: 1996 Ford Probe
Date Posted: May 23, 2002 at 7:47 AM

I've wired a keyless entry to a ford probe (1996) but when you lock& unlock it a couple of times it sets off the factory Imobiliser , ( I've trigered (positive lock&positive unlock) from the right hand door switch diode ,how do I make it work with the factory Imobiliser . Any info appreisated .

Replies:

Posted By: the12volt
Date Posted: May 23, 2002 at 8:29 AM

HI Dave, you have a one wire door lock system and your connections should be the same as this: https://www.the12volt.com/doorlocks/page2.asp#fp You may also have a factory disarm lead, Yellow/Red (-) behind the fuse panel in a Gray connector.

Here's the rest of what I have for your vehicle: https://www.the12volt.com/installbay/detail.asp?info=alarm&year=1995-97&make=Ford&model=Probe&ID=17839&type=Alarm

the12volt

Print Page | Close Window