Looking for this tool

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9061
Printed Date: June 09, 2024 at 11:24 AM

Topic: Looking for this tool

Posted By: naughtydog
Subject: Looking for this tool
Date Posted: February 04, 2003 at 2:35 PM

I am on the lookout for a large plastic wedge. I had one and left it on a job and the customer claims I did'nt. !!
The one I had preciously was great for lifting trim panels etc without damaging them. The one I am looking for is about 6-8 inches long aand around 2 inches wide. Does anybody have any idea where to get one as I cant remember where mine came from.

Thanks

Ncik

Replies:

Posted By: Chris Luongo
Date Posted: February 04, 2003 at 6:37 PM

There are large plastic wedges used for splitting logs---maybe that's what you had? I used to use them as a tow truck driver, to carefully pry the car's door away from the body to get my unlocking tools inside.

I've been to a store that sold all kinds of tree-cutting supplies, like chainsaws and mulchers, and they did have those wedges. Maybe if you called a few local tree-removal companies, they could tell you where to find a store like that.

Posted By: Harry
Date Posted: February 04, 2003 at 8:04 PM

I get a few tools from this site https://www.ultradenttools.com/access.htm also try looking at place that sell locksmith tools.

Harry, Havertown,Pa

-------------

Posted By: AlarmTech
Date Posted: February 07, 2003 at 1:46 AM

paintless dent repair suppliers have these types of wedges, as do slim jim kits. Some window tint tool suppliers have them too.

-------------
Viper Equipped

Posted By: deric
Date Posted: February 07, 2003 at 5:45 AM

Eastwood also has them too

https://www.eastwoodco.com/aspfiles/itemdy01.asp?UID=2003020707460454&T1=52198&Dep_Key1=BodFen

-------------
-Deric

Posted By: naughtydog
Date Posted: February 07, 2003 at 11:39 AM

thanks for the info

Nick

Print Page | Close Window