viper r/s 03 mitsubishi outlander problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=90656
Printed Date: April 19, 2024 at 4:03 AM
Topic: viper r/s 03 mitsubishi outlander problem
Posted By: copout221
Subject: viper r/s 03 mitsubishi outlander problem
Date Posted: February 19, 2007 at 11:57 AM
Need some advice. Customer is complaining that their vehicle is shifting incorrectly and the drive indicator on the dashboard cluster is not illuminating. I checked all the fuses inside and outside without any evidence of a problem and reset the computer. Any other ideas on what could cause this. R/S system installed on Saturday. 2003 Mitsubishi Outlander 4Dr.
-------------
Don't fool with it if you don't know what it is !!
Replies:
Posted By: Hymer
Date Posted: February 19, 2007 at 12:03 PM
Make sure both accy's are powered up and the IGN is powered IGN blu/black ACCY 1 blue/red ACCY 2 blue/yell. Its a pretty easy install. Could be a timeing isse.. accy's up before ign or vise sersa. Also check the parking lite connection + GREEN / WHITE by fuse box...
-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair
Posted By: copout221
Date Posted: February 19, 2007 at 12:07 PM
Thanks... I will go back over everthing you suggested. Hopefully it is just a connection issue. It is also doing this when started with the key.
-------------
Don't fool with it if you don't know what it is !!
|