omega pass 4 ok for ’06 jeep g.cherokee?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=90671
Printed Date: May 13, 2025 at 11:27 AM

Topic: omega pass 4 ok for ’06 jeep g.cherokee?

Posted By: peterubers
Subject: omega pass 4 ok for ’06 jeep g.cherokee?
Date Posted: February 19, 2007 at 4:48 PM

Customer doesn't mind losing a key -- is this bypass acceptable? It's the standard ribbon around the key-head .. and ring around the key barrel...

-------------
The search function is your friend.

Replies:

Posted By: splaudio
Date Posted: February 19, 2007 at 6:29 PM

yes that will work fine for the transponder. but i would get a databus bypass that dose the door locks too...

Posted By: peterubers
Date Posted: February 19, 2007 at 9:39 PM

I was gunna tap into the lock/unlock common wire in the Cherokee with a ground signal via 300 and 100 ohm resistors -- can I do this? then I don't have to implement the databus bypass for the doorlocks?

The r/s has a (-) signal for lock and unlock -- can i just use resistors?

thanks for the reply

-------------
The search function is your friend.

Posted By: splaudio
Date Posted: February 20, 2007 at 7:37 PM

yes u can

Posted By: peterubers
Date Posted: February 20, 2007 at 9:42 PM

thanks guys

-------------
The search function is your friend.

Print Page | Close Window