96 ls400, alarm, remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=90722
Printed Date: May 13, 2025 at 11:24 AM

Topic: 96 ls400, alarm, remote start

Posted By: 97gss
Subject: 96 ls400, alarm, remote start
Date Posted: February 20, 2007 at 3:51 PM

Does the factory disarm wire need to be used when adding an alarm/rs? Would it work from the double unlock pulse? Also, if it is needed, can it be caught in the passenger door with the lock wires? If anyone has a good wiring diagram I'd appreciate that also.

Thanks.

Replies:

Posted By: profuse007
Date Posted: February 20, 2007 at 7:56 PM

Yes you need the disarm wire. Unit must set for dbl pulse for all door to unlock.

lk/unlk/disarm wires can be found in pass door.

gl

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).

Posted By: 97gss
Date Posted: February 21, 2007 at 7:20 PM

Thanks for the info.

Posted By: profuse007
Date Posted: February 22, 2007 at 5:08 PM

np. glad to help.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).

Print Page | Close Window