valet 561t programming
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=90761
Printed Date: May 12, 2025 at 4:59 PM
Topic: valet 561t programming
Posted By: rnemtb
Subject: valet 561t programming
Date Posted: February 21, 2007 at 3:46 PM
i can enter programming mode with the switch,how do you change the options? trying to change from tach sense to voltage sense. this is in a 2001 ford explorer. it will not pick up tach signal.double checked wire violet/wht to tan / YELLOW on truck @ecm under hood.searched the site someone else asked the same,but did not see a response.if i need a valet remote will one from a 562t work?
thanks
george
-------------
rnemtb
Replies:
Posted By: captainzab
Date Posted: February 21, 2007 at 3:57 PM
once you are in the feature channel you want
you use your activation input to switch to the next setting
ex. once in programming mode for feature 2,
press whatever you would to remote start
(usually installers hook it up to lock, so hit lock on the key fob)
-------------
Note: You Always Dont Get What You Pay For.
Posted By: rnemtb
Date Posted: February 21, 2007 at 4:17 PM
thank you will try that
george
-------------
rnemtb
|