Print Page | Close Window

nissan central locking

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=90776
Printed Date: May 13, 2025 at 7:59 AM


Topic: nissan central locking

Posted By: armstrng90
Subject: nissan central locking
Date Posted: February 21, 2007 at 7:28 PM

late model cable driven nissan central locking---wud any one have the wiring diagram/or colour code  to hook up alarm to this central locking sytem.any advice on this wud b much appreciated.cheers



Replies:

Posted By: imseth85
Date Posted: February 21, 2007 at 8:15 PM
you're going to have to be more specific.....tell us the make model and year, and exactly what you are trying to do

-------------
Seth Alvo     NY
Mobile Electronics Installer



Posted By: armstrng90
Date Posted: February 21, 2007 at 10:19 PM
thankyou 4 ur interest.fitting after market alarm to 2006 350z and need to connect to factory central locking which is double pulsed.hav never done 1 b4 as i normally just put attuator on door but cant do bcause cable driven



Posted By: KarTuneMan
Date Posted: February 21, 2007 at 10:35 PM
 LOCK Red At switch inside driver's door   - 
 UNLOCK Lt.blue (double pulse) At switch inside driver's door   - 
 DRIVER LOCK MOTOR Purple Pin-30 on Body Control Module   + 
 The Body Control Module is located in the driver's side kickpanel. See the attached image for details.
 DRIVER UNLOCK MOTOR Yellow Pin-23 on Body Control Module   + 
 The Body Control Module is located in the driver's side kickpanel. See the attached image for details.
 PASSENGER UNLOCK MOTOR WHITE/ red Pin-31 on Body Control Module   + 
 The Body Control Module is located in the driver's side kickpanel. See the attached image for details.


-------------



Posted By: armstrng90
Date Posted: February 21, 2007 at 10:40 PM
thankyou for ur diagram--so how wud i hook alarm up2 these.do i hav to go inside door? use any relays or can i hook up direct to alarm? do i need pulse generator bcause double pulsed?



Posted By: Twelvoltz
Date Posted: February 22, 2007 at 7:47 AM
Yes you would have to go into the door to interface the door locks, or pick up one of these.

Most systems offer a double unlock pulse option in the programming menu.

-------------
Installer, IT support, and FFL. I need less hobbies.


Print Page | Close Window