screwed up alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=90777
Printed Date: May 13, 2024 at 11:54 AM

Topic: screwed up alarm

Posted By: gio6661
Subject: screwed up alarm
Date Posted: February 21, 2007 at 7:39 PM

ok 2 make a long story short: I ordered a ultrastarters 3500 alarm. t tapped the alarm real well. the fm pager didn't receive a signal from the alarm box so I trashed it. now my locks don't work...they make a funny noise but don't move..sometimes the car won't start when it makes this noise and if the radio is on and I push the power to adjust the seat the radio blanks out.

so what should I do???

should I go 2 an alarm shop???

what's wrong with my car??

any thoughts, opinions or suggestions will help.....thanx

-------------
**G**

Replies:

Posted By: duct tape
Date Posted: February 21, 2007 at 7:50 PM

what kind of car is it? year/make/model?

do the door locks work with the original switches?

did you cut any ignition wires?

where did you ground the alarm?

do you have a digital multimeter? and did you use it to verify all the wires that you tapped into?

did you solder your connections?

if you dont feel comfortable troubleshooting, it might be a good idea to take it to a shop. alarm systems tie into many circuits on the car, and if you dont have alot of experience, it can be difficult to find out what is causing your problems.

-------------

Print Page | Close Window