old viper300 remote programming
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=90837
Printed Date: July 13, 2025 at 9:28 AM
Topic: old viper300 remote programming
Posted By: GReddyboy
Subject: old viper300 remote programming
Date Posted: February 22, 2007 at 7:34 PM
I tried the method turning on ignition and opening door, then press and hard valet switch then pressing left button on transmitter, then hit valet switch again and hold it and then press the right button on remote. I searched and came up on those instructions, but it dont seem to work. Keep in mind this is this is not the 300+ such as hf or esp its the first orginal viper 300. Someone please help me program the remote or a install manual would be nice. thanks
Replies:
Posted By: GReddyboy
Date Posted: February 22, 2007 at 10:59 PM
sorry wrong section, cant delete
Posted By: auex
Date Posted: February 23, 2007 at 2:42 AM
Open door, turn key on, press the valet button once, release, hold on the second push and then hit 1 button, release and hold the valet button and hit the 2 button on the remote and you should be done. Your door trigger must be working too.
------------- Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
|