old viper300 remote programming
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=90851
Printed Date: May 03, 2024 at 6:01 AM
Topic: old viper300 remote programming
Posted By: GReddyboy
Subject: old viper300 remote programming
Date Posted: February 22, 2007 at 11:01 PM
I tried the method turning on ignition and opening door, then press and hard valet switch then pressing left button on transmitter, then hit valet switch again and hold it and then press the right button on remote. I searched and came up on those instructions, but it dont seem to work. Keep in mind this is this is not the 300+ such as hf or esp its the first orginal viper 300. Someone please help me program the remote or a install manual would be nice. thanks
Replies:
Posted By: auex
Date Posted: February 23, 2007 at 2:49 AM
check the other post
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: splaudio
Date Posted: February 24, 2007 at 4:21 PM
had one range sucked threw it out. i would say this is telling u that a new system in calling u...
|