02 liberty?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=90921
Printed Date: May 10, 2025 at 9:47 AM
Topic: 02 liberty?
Posted By: splaudio
Subject: 02 liberty?
Date Posted: February 24, 2007 at 12:40 PM
i have a 02 liberty to do but have a week to order parts. it dosent have a transponder so easy there. would u use a bypass unit or just relays and resistors for the lock,unlock,headlights,tailgate,factory disarm? if a bypass which one? later...
Replies:
Posted By: mikvot
Date Posted: February 24, 2007 at 4:26 PM
I just use relays and resistors on the door locks and disarm. Other than that the vehicle is straight forward.
-------------
Posted By: splaudio
Date Posted: February 24, 2007 at 4:37 PM
nope parking lights need a relay and resistor and it states the tailgate needs a relay too.
Posted By: mikvot
Date Posted: February 24, 2007 at 4:54 PM
never used a relay on the lights....but the hatch release, you are right. I was goin by directechs rather than the info i actually use while doing the vehicle. Either way, its still an easy vehicle. Guess it all depends on much work you wanna do. -------------
Posted By: splaudio
Date Posted: February 24, 2007 at 5:37 PM
well the parking lights are - thru a 910 ohm resistor. was just wondering if many use bypass kits for this ride or do the hr of bench prep work?
Posted By: customak47
Date Posted: February 28, 2007 at 8:37 AM
bypass kits don't do the park lights, tho I wish they did....
-------------
My rifle is my friend...
|