how to an alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91012
Printed Date: May 10, 2025 at 7:55 PM
Topic: how to an alarm
Posted By: samuelsteven
Subject: how to an alarm
Date Posted: February 26, 2007 at 9:15 AM
Hi, i would like to install my own alarm, but ive never done it before. Does anyone know of any how to tutorials with pics on alarm installs?
Replies:
Posted By: green6767
Date Posted: February 26, 2007 at 9:39 AM
If you've never done it before, you're in for a challenge. I guess this would depend on the vehicle and what kind of alarm you are installing. What kind of experience do you have with 12V electronics?
-------------
Shaun, we are the same height, that is neat!
12V Installation Technician for Honda, Dodge, Chrysler, Toyota and Jeep.
Posted By: mobilecustoms
Date Posted: February 26, 2007 at 12:45 PM
i agree- alarms can get complicated expecially with remote starts
-------------
Posted By: samuelsteven
Date Posted: February 26, 2007 at 8:33 PM
Its a 99' Cadillac STS, and i think im gonna go the Viper route with the blue pager remote. I have pretty good experience with 12 volt electronics. I mean i can install a reciever in less then 10 minutes, and an amp fairly quickly, i mean unless holes have to be drilled through the fromt fire wall.
|