dodge ram 1500 1996 locks/door
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91027
Printed Date: May 09, 2025 at 6:22 PM
Topic: dodge ram 1500 1996 locks/door
Posted By: blindguy
Subject: dodge ram 1500 1996 locks/door
Date Posted: February 26, 2007 at 5:36 PM
the previous owner had an alarm with remote start already. the door locks did not work when i purchased the car. i discovered when installing the system that at splice was put in and i undid that damage. the locks still dont work normally. how do i tell if the relays are still in there if i cant find them visually? the 10 pin connector was unpluged and the unlock/lock signals were cut and the red wire was spliced. there is no V on the red wire(maybe there is suposed to be).
2nd on my alarm there is an input for the door wire + and -(two seperate) should i only be using the one that coresopnds to the wire i found or do i need to find 2 wires for the door plug?
Replies:
Posted By: blindguy
Date Posted: February 26, 2007 at 6:47 PM
ok i solved these 2 problems. (blown fuse for lock, bad connection for door)
in general what does the brake notification wire do?
Posted By: mikvot
Date Posted: February 27, 2007 at 6:59 PM
If the vehicle is broken into while remote started, the vehicle will shut down if the brake pedal is pushed.
-------------
|