Print Page | Close Window

516u where to hook the wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91097
Printed Date: May 12, 2025 at 10:44 AM


Topic: 516u where to hook the wire

Posted By: megatfauzi76
Subject: 516u where to hook the wire
Date Posted: February 28, 2007 at 2:23 AM

Hai..

Just get my 516U voice module...

From the diagram...It show the orange wire need to connect to -ve when armed at the alarm module..

Where can I find that wire from my alarm module...I just use normal alarm...

Can i hook the ORANGE wire to the wire at alarm module to lock and lock my car?

Or there is other way to do?

Thanks




Replies:

Posted By: Twelvoltz
Date Posted: February 28, 2007 at 6:54 AM
What is the make and model of your 'normal' alarm?

On DEI systems the negative when armed output is also orange, this wire is the wire that you would use to activate your starter kill relay. It provides a low current negative any time the alarm is armed and goes away once the system is disarmed. Your system should offer something similar.

-------------
Installer, IT support, and FFL. I need less hobbies.



Posted By: megatfauzi76
Date Posted: February 28, 2007 at 8:16 PM
I think mine dont have starter killer...Is there any other way to hook the 516U wire to my alarm brain?



Posted By: clarence1996
Date Posted: March 18, 2007 at 1:39 AM
Can someone send the dei 516u install guide this forum


Print Page | Close Window